Show tech command in H3C


Normally we use "show tech" (show tech-support) command to gather ALL the information from a switch or a router. This applies to all Cisco networking devices as well as HP Procurve switches (I don't know about other vendors).

The show tech command in H3C is display diagnostic-information. It does exactly the same thing as show tech, except that it will ask you if you want to save the output in a file [(inside flash), so that you can copy it using tftp], or display it on screen (as usual).

Comments

  1. Thank you so much for sharing this worth while to spent time on. You are running a really awesome blog. Keep up this good work


    HP Printer Customer Care Support

    ReplyDelete

Post a Comment

Popular posts from this blog

Telnet failed: Can't send after socket shutdown

3Com switches Password Recovery procedure